Using third party solar panel

For a better experience and efficiency, it is highly recommended to use EF solar panels.

You can also choose other brands of solar panels, if you're using a third-party solar panel, please make sure:

1. The specification of the solar panel meets the requirement of the device, 400W 10-65V DC 10A max for DELTA and 200W 10-25V DC 12A max for R600/River 600 series;

2. The connector of the solar panel is MC4 type;

3. If you're using a solar panel with other connector types, please check out this guide before use: https://bit.ly/333FB5j;

4. please note our generator product already has an MPPT board inside that controls solar charge. If the third brand solar panel has a separate controller, it might affect the solar charge.

UPS (EPS )

All EcoFlow power stations can be an emergency power source (EPS), which will have the same result as UPS for most electronics. Here's the difference, when your power station is plugged into the wall, anything plugged into it gets power from the grid, not the power station's battery. If power from the grid stops, the power station automatically switches to its battery supply mode within 30 milliseconds. This is a basic UPS function, and it does not support 0ms switching. So, do not connect the power station to any device that requires 0ms UPS, such as data servers and workstations.

https://ecoflowtechhelp.zendesk.com/